Electronic Chilled Bottle Filler and Drinking Fountain Non-Filtered 8gph – Brushed Stainless KEP8AC-EBF-STN Franke

Combination chilled drinking fountain with sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual drinking fountain activation using anti-microbial push pads.Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of 0.25% or less). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 8 gph chiller, stainless steel cabinet, sensor activated sports bottle filler with bottle counter. Optional filter kit F041253-001, Versafilter III.18 9/16 x 18 7/16 x 37 13/16″ Overall (FB x LR x H).472 x 469 x 960 mm Overall (FB x LR x H).